ID Type Plate Filter Press
Download
PDF Catalog
|
|
| FP-004
ID Type Plate Filter Press |
 In
the plate filter press, dewatering is accomplished by forcing
the water from the sludge under high pressure. The sludge
is pumped into the filter press chambers and the filtrate
is pressed through the filter clothes as pumping pressure
increases. The dewatered sludge is retained inside the press
chambers and moved as the sludge cake after a press run.
Purpose:
- Liquid/solids separation through pressure filtration.
Features:
- Mobile and integrated modular design.
- No chemical additives/polymer needed.
- The pressed sludge cake is collected by conveyors and
transported to the dedicated location/storage bins.
- Applicable to various sludge and processing applications.
Characteristics:
- Stationary plates and movable plates are made of durable
steel unity.
- The pull rods at both sides with fixed end by screw are
constructed of medium carbon round bar steel, which can
adjust the clearance by itself according to the pressure,
without the worries of stress concentration and cracks of
welding point.
- The main frame is constructed of carbon steel and all
structural steel is sand blasted, primed and painted with
corrosion resistant epoxy coating.
- Oil hydraulic system is equipped with check valve, oil
system magnetic valve control, oil pressure control switch
and recycle-oil device.
- Filter plate enclosed oil tank is made of seamless steel
tube with the maximum pressure up to 350 kg/cm2.
Applications:
- Stone/Clay/Ceramic Processing Industry.
- PC Board Industry/Electroplating Industry.
- Solvents and Process Solution Clarification.
- Reduction of Metal Finishing Waste.
- Oil Field Slurry.
- Chemical Product Processing.
- Food and Beverage Processing.
- Metal Finishing Waste.
- Tanning/Leather Processing.
|
For the following information,
please see the PDF Product Catalog.
|
- Equipment Process
- Equipment Drawings and Section Views
- Specifications
|
